What are the applications of tantalum?

Tantalum is the perfect material for heat exchangers for equipment construction due to its properties. We also manufacture riveted racks for furnace construction, implants for medical technology, and capacitor parts for the electronics industry from tantalum.

Where does the name tantalum come from?

In 1802, the Swedish chemist Anders Gustav Ekeberg separated tantalum pentoxide (Ta2O5) from columbite ore for the very first time. The oxide is named after Tantalos, a figure in Greek mythology: Tantalus (lat.) was never able to satisfy his thirst because the water around him always receded before he could reach it. In the same way, tantalum oxide cannot react with any acid. The chemical symbol Ta was proposed by Jöns Jakob Berzelius in 1814.

Where is tantalum mined?

Tantalum occurs naturally most frequently in the form of tantalite ore, which has the formula (Fe, Mn) [(Nb,Ta)O3]2. The world's largest tantalum deposits can be found in Australia, Brazil, and a number of African countries.

Online shop My Plansee

Mo Molybdenum
W Tungsten

Ta Tantalum
W-MMC Metal Matrix Composites

Tantalum: Properties & uses

Tantalum is a sensible choice whenever high corrosion resistance is required. Even though tantalum is not one of the noble metals, it is comparable to them in terms of chemical resistance. In addition, tantalum is very easy to work at well below room temperature despite its body-centered cubic crystal structure. This makes it a valuable metal for a wide range of industrial applications. We use our extremely resistant material to make various products, including components for furnace construction, implants for medical technology, parts for ion implantations, and semifinished products.

Facts about tantalum

Atomic number	73
CAS number	7440-25-7
Atomic mass	180.95 [g/mol]
Melting point	2996 °C
Boiling point	5458 °C
Density at 20 °C	16.65 [g/cm³]
Crystal structure	Body-centered cubic
Coefficient of linear thermal expansion at 20 °C	6.4 × 10^-6 [m/(mK)]
Thermal conductivity at 20 °C	57.5 [W/(mK)]
Specific heat at 20 °C	0.14 [J/(gK)]
Electrical conductivity at 20 °C	8.0 × 10⁶ [S/m]
Specific electrical resistance at 20 °C	0.125 [(Ωmm²)/m]

Characteristics and applications

Advantages and quality features of tantalum

The variety of industrial applications in which our tantalum is used reflect the unique properties of the material. Its excellent resistance coupled with its good formability and weldability make tantalum the perfect material for robust parts and components in a wide range of industries. With our many years of experience in the machining of tantalum, we are also able to manufacture complex dimensions to precisely meet your requirements. Check out our tantalum products:

Our tantalum products

Semifinished products, including sheets

Ion implanter parts

Evaporation boats

slideplansee-aem/components/imageSlide93186192

slideplansee-aem/components/imageSlide93186194
slideplansee-aem/components/imageSlide93186196

Properties

Tantalum: Properties

Tantalum belongs to the group of metals with a high melting point (also called refractory metals). Refractory metals have a higher melting point than platinum (1772 °C). The binding energy between the individual atoms is particularly high. Refractory metals are also characterized by a high melting point coupled with a low vapor pressure. In addition, high density and a low coefficient of thermal expansion are also characteristic of refractory metals.

In the periodic table, tantalum is located in the same group as tungsten. With a density of 16.65 g/cm³, tantalum has a similarly high density to tungsten. However, unlike tungsten, tantalum becomes brittle in hydrogen atmospheres and is therefore sintered in a high vacuum.

Tantalum is without doubt the most resistant of the refractory metals and is also resistant to most acids (excluding hydrofluoric acid).

What are the physical properties of tantalum?
Refractory metals are typically characterized by a low coefficient of thermal expansion and relatively high density. The same is true for tantalum. However, the thermal conductivity of tantalum is lower compared to tungsten and molybdenum. The thermophysical properties of tantalum change with temperature. The diagrams below illustrate the curves for the most important variables:
Coefficient of linear thermal expansion of tantalum and niobium
Specific heat capacity of tantalum and niobium
Thermal conductivity of tantalum and niobium
What are the mechanical properties of tantalum?
Even small quantities of interstitially dissolved elements such as oxygen, nitrogen, hydrogen, and carbon are able to modify the mechanical properties of tantalum. In addition, the manufacturing process, the level of deformation, and the type of heat treatment used also influence its mechanical properties.

Like both tungsten and molybdenum, tantalum has a body-center cubic crystal structure. At -200 °C, the brittle-to-ductile transition temperature is well below room temperature. As a result, the metal is very easy to work. While its tensile strength and hardness increase with increased forming, this simultaneously causes the material's breaking elongation to decrease. However, the material does not become brittle.

The material's high-temperature stability is lower than that of tungsten but similar to the values found for pure molybdenum. We alloy our tantalum with refractory metals such as tungsten to increase the high-temperature stability.

Tantalum's modulus of elasticity is lower than that of tungsten and molybdenum and resembles that of pure iron. The modulus of elasticity falls with increasing temperature.
Modulus of elasticity of tantalum compared to that of tungsten, molybdenum, and niobium.
Thanks to its high level of ductility, tantalum is well suited for chipless forming processes such as bending, stamping, pressing, or deep drawing. It is very difficult to use machining processes with tantalum. The chips do not break cleanly. We therefore recommend the use of chip breakers. Tantalum offers excellent weldability compared to tungsten and molybdenum.

Do you have any questions about the mechanical processing of refractory metals? We would be delighted to help you with our many years of experience.

What is the chemical behavior of tantalum?

Because tantalum is resistant to all types of chemical substances, this material is often compared to noble metals. However, in thermodynamic terms, tantalum is a base metal which can nevertheless form stable compounds with a wide variety of elements. When exposed to air, tantalum forms a very dense oxide layer (Ta₂O₅) which protects the base material from chemical attack. This oxide layer therefore makes tantalum corrosion-resistant.

At room temperature, the only inorganic substances that tantalum is not resistant to are: fluorine, hydrogen fluoride, hydrofluoric acid, and acid solutions containing fluoride ions. Alkaline solutions, molten sodium hydroxide, and potassium hydroxide also attack tantalum. In contrast, the material is resistant to aqueous ammonia solutions. If tantalum is exposed to chemical aggression, hydrogen enters its metal lattice and the material becomes brittle. The corrosion resistance of tantalum falls gradually with increasing temperature.

Tantalum is inert in contact with many solutions. However, if tantalum is exposed to mixed solutions, its corrosion resistance may be impaired even if it is resistant to the individual components taken separately. Do you have any questions regarding complex corrosion-related topics? We would be delighted to help you with our experience and our in-house corrosion laboratory.

MEDIUM	RESISTANT (+), NON-RESISTANT (-)	NOTE
Water
Hot water < 150 °C	+
Acids
Hydrofluoric acid, HF	-
Hydrochloric acid, HCI	+	< 30%, < 190 °C
Phosphoric acid, H₃PO₄	+	< 85%, < 150 °C
Sulfuric acid, H₂SO₄	+	< 98%, < 190 °C
Nitric acid, HNO₃	+	< 65%, < 190 °C
Organic acids	+
Lyes
Ammonia solution, NH₄OH	+	< 17%, < 50 °C
Potassium hydroxide, KOH	+	< 5%, < 100 °C
Sodium carbonate, Na₂CO₃	+	< 20%, < 100 °C
Sodium hydroxide, NaOH	+	< 5%, < 100 °C
Halogens
Fluorine, F₂	-
Chlorine, Cl₂	+	< 150 °C
Bromine, Br₂	+	< 150 °C
Iodine, I₂	+	< 150 °C
Non-metals
Borine, B	+	< 1000 °C
Phosphorous, P	+	< 150 °C
Sulfur, S	+	< 150 °C
Gases
Tantalum does not react with noble gases. As a result, high purity noble gases can be used as protective gases. However, with increasing temperature, tantalum reacts very strongly with oxygen or air and may absorb large quantities of hydrogen and nitrogen. This causes the material to become brittle. Annealing tantalum in a high vacuum gets rid of these impurities. Hydrogen is eliminated at 800 °C and nitrogen at 1700 °C.
Ammonia, NH₃	+	< 700 °C
Carbon monoxide, CO	+	< 1100 °C
Carbon dioxide, CO₂	+	< 500 °C
Hydrocarbons	+	< 800 °C
Air and oxygen, O₂	+	< 300 °C
Noble gases (He, Ar, N₂)	+
Hydrogen, H₂	+	< 340 °C
Water vapor	+	< 200 °C
Melts
Chemical reactions arise very quickly when base materials such as tantalum are brought into contact with noble materials such as platinum. You should therefore take careful account of the behavior of tantalum in contact with the other materials present in the system, especially at high operating temperatures.
Aluminum, Al	-
Beryllium, Be	-
Lead, Pb	+	< 1000 °C
Cesium, Cs	+	< 980 °C
Copper, Cu	+	< 1300 °C
Gallium, Ga	+	< 450 °C
Iron, Fe	-
Lithium, Li	+	< 1000 °C
Magnesium, Mg	+	< 1150 °C
Mercury, Hg	+	< 600 °C
Nickel, Ni	-
Potassium, K	+	< 1000 °C
Silver, Ag	+	< 1200 °C
Sodium, Na	+	< 1000 °C
Tin, Sn	+	< 260 °C
Zinc, Zn	+	< 500 °C
Furnace construction materials
In high-temperature furnaces, tantalum may react with construction parts made of refractory oxides or graphite. Even very stable oxides such as aluminum, magnesium, or zirconium oxide may be reduced at high temperatures when in contact with tantalum. Contact with graphite may cause the formation of tantalum carbide and lead to the embrittlement of the tantalum. Although tantalum can usually be combined without problems with other refractory metals such as molybdenum or tungsten, it may react with hexagonal boron nitride and silicon nitride. The limit temperatures listed below apply in a vacuum. If a protective gas is used, these temperatures are approximately 100 to 200 °C lower.
Alumina, Al₂O₃	+	< 1900 °C
Beryllium oxide, BeO	+	< 1600 °C
Hex. boron nitride, BN	+	< 700 °C
Graphite, C	+	< 1000 °C
Magnesium oxide, MgO	+	< 1800 °C
Molybdenum, Mo	+
Silicon nitride, Si₃N₄	+	< 700 °C
Thorium oxide, ThO₂	+	< 1900 °C
Tungsten, W	+
Zirconium oxide, ZrO₂	+	< 1600 °C

Corrosion behavior of tantalum against selected substances

Hydrogen embrittlement
Sulfuric acid 98% at 250 °C	Atomic hydrogen > 25 °C
Hydrochloric acid 30% at 190 °C	Hydrogen at 350 °C
Hydrofluoric acid	Cathodic polarization with less noble, dissolving materials

Measures against hydrogen embrittlement are as follows:

Electrical insulation of the metals
Positive polarization of the metals (approx. + 15 V)
Addition of oxidants to the solutions
Use of formed metal surfaces
Electrical contact with a more noble metal (e.g., Pt, Au, Pd, Rh, Ru)

Tantalum that has become brittle can be regenerated by means of high-vacuum annealing at 800°C.

Range of materials

Pure tantalum or maybe an alloy? We would be happy to advise you.

You can rely on our quality. We produce our tantalum products from the metal powder to the finished product. We only use the purest tantalum powder as the source material. This is how we can guarantee you a very high material purity. Find out more about our powder metallurgy production process in the following section.

We guarantee a purity of 99.95% for our sintered quality tantalum (metallic purity without Nb). The remaining portion is made up primarily of the following elements according to a chemical analysis:

Element	Typical max. value [μg/g]	Guaranteed max. value [μg/g]
Fe	17	50
Mo	10	50
Nb	10	100
Ni	5	50
Si	10	50
Ti	1	10
W	20	50
C	11	50
H	2	15
N	5	50
O	81	150
Cd	5	10
Hg	-	1
Pb	5	10

The presence of Cr (VI) and organic impurities can be excluded definitely because of the production process (multiple heat treatment at temperatures above 1000 °C in H2-atmosphere)

We guarantee a purity of 99.95% for our melted quality tantalum (metallic purity without Nb). The remaining portion is made up primarily of the following elements according to a chemical analysis:

Element	Typical max. value [μg/g]	Guaranteed max. value [μg/g]
Fe	5	100
Mo	10	100
Nb	19	400
Ni	5	50
Si	10	50
Ti	1	50
W	20	100
C	10	30
H	4	15
N	5	50
O	13	100
Cd	-	10
Hg	-	1
Pb	-	10

The presence of Cr (VI) and organic impurities can be excluded definitely because of the production process (multiple heat treatment at temperatures above 1000 °C in H2-atmosphere)

Material designation		Chemical composition (percent by weight)
Sintered quality S	Sintered quality tantalum (TaS)	> 99.95
	TaW2.5	2.5% W
	TaW10	10% W
Melted quality M	Melted quality tantalum (TaM)	> 99.95

We optimally prepare our tantalum for each application. We define the following properties due to various alloying additions:

Physical properties (e.g., melting point, density, electrical conductivity, thermal conductivity, thermal expansion)
Mechanical properties (e.g., strength, ductility)
Chemical properties (e.g., corrosion resistance, etching behavior)
Workability (e.g., machinability, formability, welding suitability)
Structure and recrystallization behavior (e.g., recrystallization temperature, grain size)

And we don't stop there: we can also vary the tantalum properties in other areas due to tailor-made manufacturing processes. The result: tantalum alloys with different property profiles that are customized to the respective application.

Pure sintered quality tantalum and pure melted quality tantalum share the following properties:

High melting point of 2996 °C
Good cold ductility
Recrystallization between 800 °C and 1200 °C (depending on the level of deformation and purity)
Outstanding resistance against aqueous solutions and metal melts
Superconductivity
High level of biocompatibility

Sintered quality tantalum (TaS)
Our sintered quality tantalum is used for those tricky situations: due to our powder metallurgy production process, sintered quality tantalum (TaS) is particularly fine-grained. As a result, the material is very easy to work and excels due to its excellent surface quality and robust mechanical properties.
Melted quality tantalum (TaM)
The most expensive product is not always the best. Melted quality tantalum (TaM) is usually more economical to produce than sintered quality tantalum and provides sufficient quality for many applications. However, the material is neither as fine nor as homogeneous as sintered quality tantalum. Get in touch. We would be happy to advise you.
Tantalum-tungsten (TaW)
Tantalum-tungsten (TaW) excels due to its good mechanical properties and excellent corrosion resistance. We add between 2.5 and 10 percent by weight of tungsten to pure tantalum. Although the resulting alloy is up to 1.4 times stronger than pure tantalum, it remains easy to work at temperatures of up to 1600 °C. Our TaW alloys are therefore especially well-suited for the heat exchangers and hot zones used in chemical equipment construction as well as for components in the aviation and aerospace industries.

Contact

Are you looking for the right material for your application? Feel free to contact us directly.

Deposits and sourcing

Tantalum deposits and sustainable sourcing

Where does tantalum come from naturally?
In 1802, the Swedish chemist Anders Gustav Ekeberg separated tantalum pentoxide (Ta2O5) from columbite ore for the very first time. The oxide is named after Tantalos, a figure in Greek mythology: Tantalus (lat.) was never able to satisfy his thirst because the water around him always receded before he could reach it. In the same way, tantalum oxide cannot react with any acid. The chemical symbol Ta was proposed by Jöns Jakob Berzelius in 1814. Berzelius was also the first person to produce elementary tantalum. However, Heinrich Rose recognized that the tantalum produced in this way actually only consisted of 50% tantalum. In 1844, Rose succeeded in proving that tantalum and niobium were different and distinctive elements. And it was not until 100 years later that Werner von Bolton was able to produce pure tantalum by reducing potassium heptafluorotantalate with sodium.

Tantalum occurs naturally most frequently in the form of tantalite ore, which has the formula (Fe, Mn) [(Nb,Ta)O3]2. When the tantalum content predominates, the ore is referred to as tantalite. When more niobium than tantalum is present, it is known as columbite or niobite. The world's largest tantalum deposits can be found in Australia, Brazil, and a number of African countries.

The ore is refined using a variety of methods to obtain concentrates of approximately 70% (Ta, Nb)2O5. This concentrate is then dissolved in a mixture of hydrofluoric and sulfuric acid. The resulting fluoride complex (TaF7) is then converted to an organic phase by means of a liquid extraction process. The organic phase is separated from the aqueous phase. The tantalum is then separated from the organic phase using potassium hydrogen fluoride. This process produces potassium heptafluorotantalate (K2TaF7). The tantalum compound obtained in this way is then reduced with sodium to produce pure metallic tantalum.

RMAP-compliant sourcing of tantalum

Tantalum is partially mined in regions that are considered conflict and high-risk areas and is therefore classified as a "conflict mineral." As a company aware of its responsibilities, we take particular care when sourcing raw materials.

Based on a wide range of measures such as the RMAP Recognition Certificate, we ensure that we do not source or use any raw materials from socially, ethically, or ecologically questionable sources.

With this voluntary commitment, we demonstrate that our tantalum is responsibly procured, as certified by the Responsible Minerals Initiative (RMI). This has been backed up by the audit committee of the Responsible Business Alliance (RBA), which has confirmed that we source our tantalum in compliance with the RMAP. For Plansee's customers, this certificate provides independent proof that we are compliant with the Responsible Minerals Assurance Process (RMAP).

Producing tantalum based on powder metallurgy

So what is powder metallurgy?
It is well known that nowadays most industrial metals and alloys, such as steels, aluminum, and copper, are produced by melting and casting in a mold. In contrast, powder metallurgy does away with the melting process and the products are manufactured by compacting metal powders which are then subjected to a heat treatment (sintering) below the melting temperature of the material. The three most important factors in the field of powder metallurgy are the metal powder itself as well as the compacting and sintering processes. We are able to control and optimize these factors in-house.

Why do we use powder metallurgy?
Powder metallurgy allows us to produce materials with melting points of well over 2000 °C. The procedure is particularly economical even when only small quantities are produced. In addition, by using tailor-made powder mixes, we can produce a range of extremely homogeneous materials endowed with specific properties.

From tantalum powder to the final product
The tantalum powder is mixed with alloying elements and then filled into molds. The mixture is then compacted at a pressure of up to 2000 bar. The resulting pressed blank (also known as a "green compact") is then sintered in special furnaces at temperatures of over 2000 °C. During this process, it acquires its density and its microstructure forms. The very special properties of our materials – such as their excellent high-temperature stability and hardness or their flow characteristics – are due to the use of the appropriate forming methods, for example, forging, rolling, or drawing. Only when all these steps dovetail perfectly can we achieve our exacting quality requirements and manufacture products of outstanding purity and quality.

Oxide

Reduction

Mixing alloys

Pressing

Sintering

Forming

Heat treatment

Mech. processing

Quality assurance

Recycling

OxideMolymet (Chile) is the world's largest processor of molybdenum ore concentrates and our main supplier of molybdenum trioxide. The Plansee Group holds a 21.15% share in Molymet. Global Tungsten & Powders (USA) is a division of the Plansee Group and our main supplier of tungsten metal powder.

Product range

Overview of semifinished products made of tantalum and tantalum alloys:
Material	Sheets [thickness]	Ribbons [thickness]	Rods [diameter]	Tubes

TaS	Upon request	Upon request	Upon request	Upon request
TaM	0.10 – 40 mm	Upon request	3.0 – 120 mm	Upon request

Other dimensions as well as formed and machined parts or finished parts according to customer specification are available upon demand.

Online shop

Tantalum products in the Plansee online shop

You can order sheets, rods, ribbons, and wires as well as other products in configurable dimensions quickly and easily in our online shop.

Take a look at our products in the Plansee online shop

Downloads

Tantalum product data sheet

Would you like to learn more about tantalum and its alloys? Take a look at our product data sheet here.

Product data sheet: Tantalum

FAQs

Frequently asked questions regarding tantalum

What are the applications of tantalum?
Tantalum is the perfect material for heat exchangers for equipment construction due to its properties. We also manufacture riveted racks for furnace construction, implants for medical technology, and capacitor parts for the electronics industry from tantalum.
Where does the name tantalum come from?
In 1802, the Swedish chemist Anders Gustav Ekeberg separated tantalum pentoxide (Ta2O5) from columbite ore for the very first time. The oxide is named after Tantalos, a figure in Greek mythology: Tantalus (lat.) was never able to satisfy his thirst because the water around him always receded before he could reach it. In the same way, tantalum oxide cannot react with any acid. The chemical symbol Ta was proposed by Jöns Jakob Berzelius in 1814.
Where is tantalum mined?
Tantalum occurs naturally most frequently in the form of tantalite ore, which has the formula (Fe, Mn) [(Nb,Ta)O₃]₂. The world's largest tantalum deposits can be found in Australia, Brazil, and a number of African countries.